howto:sscs:xerox_print_mac
This is an old revision of the document!
Table of Contents
Xerox Printing - From a Mac laptop or desktop
Please make sure you have contacted Craig Stone to get a print/copy code. You will need to enter your code during the setup below.
Setup involves two steps, detailed below
- Download and run the Xerox print driver installer
- Configure the printer with your copy code
Note that if you are on the "UCInet Mobile Access" wireless network, you must use the VPN software before attempting to connect to the printer.
Step 1. Download and run the Xerox Print Driver installer
Download
Run the installer
- Open the xeroxprintdriver DMG file, which may be in your Downloads folder or on your Desktop
- Run the “Xerox Print Driver 3.41.0_1422.pkg” installation file
- Click 'Continue'
Click continue through the License agreement and Destination Selection parts, then click on 'Install'
- At this The installer will attempt to scan the network for printers.
- Click on the icon circled in red (above) to bring up the manual IP input screen
- In the text field (boxed in red above), enter the IP of hte Xerox printer you wish to add. The IP address illustrated is just an example. If the IP of the printer was not already provided to you, please check with the Copy Center or Computing Services for it.
- After entering the IP, click 'Continue'
Step 2. Configure the printer with your copy code
howto/sscs/xerox_print_mac.1412367277.txt.gz · Last modified: 2014/10/03 20:14 by jnilsson