howto:sscs:xerox_print_linux
This is an old revision of the document!
Table of Contents
Xerox Printing - From a Linux system
Please make sure you have contacted Craig Stone to get a print/copy code. You will need to enter your code during the setup below.
Setup involves two steps, detailed below
- Download and install the Xerox installation package
- Run the xeroxprtmgr program to connect and configure the printer
Note that if you are on the "UCInet Mobile Access" wireless network, you must use the VPN software before attempting to connect to the printer.
Download and install Xerox Driver
Depending on your system type, install the package with:
dpkg -i xeroxv5pkg-linuxx86_64-5.15.551.3245.deb
or
rpm -ivh xeroxv5pkg-linuxx86_64-5.15.551.3245.rpm
Run 'xeroxprtmgr' as root
1. Run "''sudo xeroxprtmgr''"
The program should be installed in /usr/bin/ and automatically in your PATH. Open your Terminal and run:
sudo xeroxprtmgr
to start the configuration program
2. Click on the icon for "Discovered Printers"
3. Click on the printer you want from the list, or if the one you want is not listed, choose any available Xerox printer and we can change it later
- click on a printer, then click the double-downward triangle icon to choose it.
4. Set "Queue Name", "Printer Model" and "IP/DNS"
- Queue Name can be any short description, but no spaces are allowed
- Printer Model should be Xerox WorkCentre 5855
- IP/DNS - type the IP address for your printer. If you don't know, refer to this chart:
| Department | Property Tag | Room | name | IP Address |
|---|---|---|---|---|
| Mailroom | C14092401 | SSPA 3163 | px5855r3a63.ss.uci.edu | 128.195.148.99 |
| Bussiness Office | C14092407 | SSPA 5120 | px5855r5a20.ss.uci.edu | 128.195.159.100 |
| SSCS | C14092400 | SSPB 1296 | px5855r1b96.ss.uci.edu | 128.195.160.100 |
| Econ | C14092404 | SSPB 3216 | px5855r3b16.ss.uci.edu | 128.195.160.109 |
| PoliSci | C14092405 | SSPB 5218 | px5855r5b18.ss.uci.edu | 128.195.171.70 |
| Sociology | C14092409 | SSPB 4218 | px5855r4b18.ss.uci.edu | 128.195.171.100 |
| Dean's Office | C14092406 | SBSG 5417 | px5855r5417.ss.uci.edu | 128.195.244.125 |
| Undergrad Student Affairs | C14092403 | SBSG 1225 | px5855r1225.ss.uci.edu | 128.195.244.150 |
| CogSci | C14092402 | SBSG 2545 | px5855r2545a.ss.uci.edu | 128.200.38.109 |
| LPS | C14092408 | SST 710 | px5855rt710.ss.uci.edu | 128.200.138.103 |
5. Click "OK" and then "Close" on the remaining dialog boxes
- You are all done adding the printer, but you still need to configure the accounting settings by entering your copy code the first time you print.
6. Entering your Copy Code using the system print dialog box
- Use the Job tab to enter your billing copy code
- NOTE: we have discovered that printing using the Chrome or other application-specific print dialog boxes does not work. You must use the system print dialog.
howto/sscs/xerox_print_linux.1415659343.txt.gz · Last modified: 2014/11/10 22:42 by jnilsson