===== Xerox Printing - From a Linux system =====

  * **NOTE:** Please make sure you have contacted [[mailto:cestone@uci.edu|Craig Stone]] to get a print/copy code. You will need to enter your code during the setup below.

==== Setup involves three steps, detailed below ====

  - [[#download_and_install_xerox_driver|Download and install the Xerox installation package]]
  - [[#run_xeroxprtmgr_as_root|Run the xeroxprtmgr program to connect and configure the printer]]

=== Note that if you are on the "UCInet Mobile Access" wireless network, you must use the VPN software before attempting to connect to the printer. ===

  * [[http://www.oit.uci.edu/kb/vpn-linux/|OIT VPN Instructions for Linux]]


==== 1) Download and install Xerox Driver ====

  * {{howto:sscs:xeroxv5pkg-linuxx86_64-5.15.551.3245.deb|The DEB installer for Ubuntu/Debian}}
  * {{howto:sscs:xeroxv5pkg-linuxx86_64-5.15.551.3245.rpm|The RPM installer for RHEL/CentOS/Fedora}}

Depending on your system type, install the package with:<code>
dpkg -i xeroxv5pkg-linuxx86_64-5.15.551.3245.deb
</code> or <code>rpm -ivh xeroxv5pkg-linuxx86_64-5.15.551.3245.rpm</code>









==== 2) Run 'xeroxprtmgr' as root ====
=== 1. Run "''sudo xeroxprtmgr''" ===
The program should be installed in ''/usr/bin/'' and automatically in your PATH. Open your Terminal and run:<code>
sudo xeroxprtmgr</code>
to start the configuration program

=== 2. Click on the icon for "Discovered Printers" ===
{{howto:sscs:xeroxprtmgr1.png|}}

=== 3. Click on your printer from the list, or Click the top-right icon and select "Manual Install" ===
{{howto:sscs:xeroxprtmgr2.png|}} {{howto:sscs:xeroxprtmgr2a.png|}}
  * If your printer is listed, select it and then click the double-downward triangle icon to edit options.

=== 4. Set "Queue Name", "Printer Model" and "IP/DNS" ===
{{howto:sscs:xeroxprtmgr3.png|}}
  * Queue Name can be any short description, but no spaces are allowed
  * Printer Model should be Xerox WorkCentre 5855
  * IP/DNS - type the IP address for your printer. If you don't know, refer to this chart:

^  Department  ^  Property Tag  ^  Room  ^  name  ^  IP Address  |
| Mailroom  |  C14092401  |  SSPA 3163  |  px5855r3a63.ss.uci.edu  |  128.195.148.99  |
| Bussiness Office  |  C14092407  |  SSPA 5120  |  px5855r5a20.ss.uci.edu  |  128.195.159.100  |
| Anthro  |  C14092400  |  SBSG 3545  |  px5855r3545.ss.uci.edu  |  128.195.244.160  |
| Econ  |  C14092404  |  SSPB 3216  |  px5855r3b16.ss.uci.edu  |  128.195.160.109  |
| PoliSci  |  C14092405  |  SSPB 5218  |  px5855r5b18.ss.uci.edu  |  128.195.171.70  |
| Sociology  |  C14092409  |  SSPB 4218  |  px5855r4b18.ss.uci.edu  |  128.195.171.100  |
| Dean's Office  |  C14092406  |  SBSG 5417  |  px5855r5417.ss.uci.edu  |  128.195.244.125  |
| Undergrad Student Affairs  |  C14092403  |  SBSG 1225  |  px5855r1225.ss.uci.edu  |  128.195.244.150  |
| CogSci  |  C14092402  |  SBSG 2545  |  px5855r2545a.ss.uci.edu  |  128.200.38.109  |
| LPS  |  C14092408  |  SST  710   |  px5855rt710.ss.uci.edu  |  128.200.138.103  |

=== 5. Click "OK" and then Open the "Queue Preferences" for the new printer to set your Print Billing Code ===
{{howto:sscs:xeroxprtmgr4.png|}} {{howto:sscs:xeroxprtmgr5.png|}}
  * Select your printer from the list and then click on the right-most icon to get options
  * Click on "Queue Preferences..."

=== 6. Click on the "Configuration" tab and then the "Accounting" button ===
{{howto:sscs:xeroxprtmgr6.png|}}

=== 7. Setup the "Xerox Standard Accounting" options ===
{{howto:sscs:xeroxprtmgr7.png|}}
  * Change from "Accounting System: None" to "Xerox Standard Accounting"
  * Change from "Always Prompt" to "Do Not Prompt"
  * Enter your billing code that you received from Craig Stone as the "Default User ID"
  * Finally click "OK" on this window and Close any remaining windows.

=== 8. You should now be able to print from any application ===

  * If you print using Chrome (and possibly some other apps), you will see a menu like this, and you must click the link at the bottom to print using the system dialog:
{{howto:sscs:chrome-print-use-system-dialog.png|}}